Maintenance and upkeep of transparent film packaging machine
Maintenance and upkeep of transparent film packaging machine
1. During the transportation process, the vacuum packaging machine is not allowed to be tilted or collided, nor can it be placed upside down for transportation. The vacuum packaging machine must have a reliable grounding device during installation.
2. It is strictly prohibited to put your hands under the heating rod to prevent injury. In case of emergency, immediately cut off the power supply. When working, ventilate before turning on the power, and when stopping, cut off the power before turning off the gas.
3. The impurity filter should be frequently disassembled and cleaned (usually once every 1-2 months, and the cleaning time should be shortened for packaging debris).
4. For continuous operation for 2-3 months, the back cover should be opened and 30 pairs of sliding parts and switch bumpers should be lubricated. The connecting and moving parts on the heating rod should be lubricated according to usage. The pressure reducing, filtering, and oil mist triplets 24 should be regularly inspected to ensure oil mist and oil mist
There is oil (sewing machine oil) in the cup, and there is no water in the filter cup.
5. The heating strip and silicone strip should be kept clean and free from foreign objects to avoid affecting the sealing quality. The second layer of adhesive on the heating rod and under the heating plate serves as insulation. When there is damage, it should be replaced in a timely manner to avoid short circuits. User provided working air source and charging
The working pressure of the air source and vacuum packaging machine has been set to 0.3MPa, which is more suitable. Do not adjust it too much unless there are special circumstances.
6. The cigarette packaging machine should be used in an environment with a temperature of -10 ℃ -50 ℃, a relative humidity of not more than 85%, and no corrosive gases, dust, or explosive hazards in the surrounding air. Like the packaging machine and shrinking machine, this vacuum packaging machine is three-phase 380V electric
Source,
7. To ensure the normal operation of the vacuum pump for the vacuum packaging machine, the vacuum pump motor is not allowed to reverse. The three-dimensional transparent film packaging machine for oil and tea leaves should be checked frequently. The normal oil level should be 1/2-3/4 of the oil window (not exceeding), and when there is water or oil color in the vacuum pump
When it turns black, the oil should be replaced with a new one (usually once every two months of continuous operation, using 1 # vacuum gasoline or 30 # gasoline or engine oil can also be used).